What are the factors on which the modulus of elasticity depends?

Two blocks of masses $1 \, kg$ and $2 \, kg$ are connected by a metal wire going over a smooth pulley as shown in the figure. The breaking stress of the metal is $2 \times 10^9 \, N/m^2$. What should be the minimum radius of the wire used if it is not to break? Take $g = 10 \, m/s^2$.

$A$ metal wire of length $0.5\; m$ and cross-sectional area $10^{-4}\; m^{2}$ has a breaking stress of $5 \times 10^{8}\; N/m^{2}$. $A$ block of mass $10\; kg$ is attached to one end of the wire and is rotated in a horizontal circle. The maximum linear velocity of the block will be $v\; m/s$. Find $v$.

$A$ sphere of mass $4 \,kg$ is attached to one end of a steel wire of length $1 \,m$ and radius $1 \,mm$. It is whirled in a vertical circle with an angular velocity $10 \,rad \,s^{-1}$. If the sphere is at the lowest point of its path,the elongation in the wire is . . . . . . $(g=10 \,ms^{-2}, Y_{\text{steel}}=20 \times 10^{10} \,Nm^{-2})$ (in $\,mm$)

$A$ wire of length $5 \,m$ is twisted through $30^{\circ}$ at its free end. If the radius of the wire is $1 \,mm$,the shearing strain in the wire is: (in $^{\circ}$)

Copper has a face-centered cubic $(fcc)$ lattice with an interatomic spacing equal to $2.54 \ \mathring{A}$. The value of the lattice constant for this lattice is .... $\mathring{A}$ $[AIPMT \ 2005]$