What is meant by parallel connection of resistors? Derive the equation for equivalent resistance in a parallel circuit.

Vedclass pdf generator app on play store
Vedclass iOS app on app store
(N/A) If the ends of two or more resistors are joined together at common points,such an arrangement is called a parallel connection of resistors.
In a parallel connection,the potential difference $(V)$ remains the same across all resistors,while the total current $(I)$ flowing from the source is divided among the resistors. The sum of the currents flowing through individual resistors is equal to the total current in the circuit.
Consider two resistors $R_{1}$ and $R_{2}$ connected in parallel between points $a$ and $b$,with a battery of terminal voltage $V$ connected across them. The total current $I$ enters at point $a$ and splits into $I_{1}$ and $I_{2}$.
At point $a$,by Kirchhoff's current law:
$I = I_{1} + I_{2}$ ... $(1)$
According to Ohm's law,the current through each resistor is:
$I_{1} = \frac{V}{R_{1}}$ ... $(2)$
$I_{2} = \frac{V}{R_{2}}$ ... $(3)$
Substituting $(2)$ and $(3)$ into $(1)$:
$I = \frac{V}{R_{1}} + \frac{V}{R_{2}} = V \left( \frac{1}{R_{1}} + \frac{1}{R_{2}} \right)$
If $R_{p}$ is the equivalent resistance of the parallel combination,then $I = \frac{V}{R_{p}}$.
Therefore,$\frac{V}{R_{p}} = V \left( \frac{1}{R_{1}} + \frac{1}{R_{2}} \right)$
Thus,the equivalent resistance formula is:
$\frac{1}{R_{p}} = \frac{1}{R_{1}} + \frac{1}{R_{2}}$

Explore More

Similar Questions

If the resistance between each dot is $R$,then the equivalent resistance between $A$ and $B$ is:

Difficult
View Solution

You are given several identical resistances each of value $R = 10\,\Omega$ and each capable of carrying a maximum current of $1\,A$. It is required to make a suitable combination of these resistances to produce a resistance of $5\,\Omega$ which can carry a current of $4\,A$. The minimum number of resistances of the type $R$ that will be required for this job is:

Two wires with temperature coefficients of resistance $\alpha_1$ and $\alpha_2$ have resistances $R_1$ and $R_2$ at $0^{\circ}C$. If they are connected in series,what is the effective temperature coefficient of resistance?

Difficult
View Solution

Six equal resistances are connected between points $P, Q$ and $R$ as shown in the figure. Then the net resistance will be maximum between:

What will be the most suitable combination of three resistors $A = 2 \, \Omega$,$B = 4 \, \Omega$,$C = 6 \, \Omega$ so that $\frac{22}{3} \, \Omega$ is the equivalent resistance of the combination?

Vedclass Products

For Students

Vedclass Test Series

Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.

Start Free Trial
For Teachers

Exam Paper Generator

Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.

Try Free
For Institutes

Online Exam Module

Live online exams with unlimited students, 360° analytics & white-label branding.

See Demo