What is the shear modulus for a liquid?

Steel ruptures when a shear stress of $3.5 \times 10^8 \, N \, m^{-2}$ is applied. The force needed to punch a $1 \, cm$ diameter hole in a steel sheet $0.3 \, cm$ thick is nearly:

As shown in the figure,forces of $10^5\,N$ each are applied in opposite directions on the upper and lower faces of a cube of side $10\,cm$,shifting the upper face parallel to itself by $0.5\,cm$. If the side of another cube of the same material is $20\,cm$,then under similar conditions as above,the displacement will be ......... $cm$.

The upper end of a wire of diameter $12\,mm$ and length $1\,m$ is clamped and its other end is twisted through an angle of $30^{\circ}$. The angle of shear is $........^{\circ}$.

$A$ rubber cube of side $5 \ cm$ has one face fixed while a tangential force $1800 \ N$ is applied on its opposite face. If the modulus of rigidity of rubber is $2.4 \times 10^6 \ N \ m^{-2}$,then the lateral displacement of the strained face is $......$ . (in $mm$)

$A$ square lead slab of side $50\, cm$ and thickness $10\, cm$ is subject to a shearing force (on its narrow face) of $9.0 \times 10^{4} \, N$. The lower edge is riveted to the floor. How much will the upper edge be displaced? (Given: Shear modulus of lead $G = 5.6 \times 10^{9} \, N/m^2$)