When an AC source of emf E with angular frequ | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) From the figure, the current $I$ leads the emf $E$ by a phase angle $\phi = \frac{\pi}{4}$. This indicates that the circuit is a capacitive circui

Vedclass · Accepted Answer

$R=1 	ext{ k}\Omega, C=10 \mu	ext{F}$

Vedclass · Answer

(D) From the figure, the current $I$ leads the emf $E$ by a phase angle $\phi = \frac{\pi}{4}$. This indicates that the circuit is a capacitive circuit ($RC$ series circuit).In an $RC$ series circuit, the phase angle $\phi$ is given by $	an \phi = \frac{X_C}{R}$.Given $\phi = \frac{\pi}{4}$, we have $	an(\frac{\pi}{4}) = 1$, so $X_C = R$.We know $X_C = \frac{1}{\omega C}$.Given $\omega = 100 	ext{ rad/s}$ and $R = 1 	ext{ k}\Omega = 1000 	ext{ }\Omega$.Substituting these values: $1000 = \frac{1}{100 	imes C}$.$C = \frac{1}{100 	imes 1000} = \frac{1}{10^5} = 10 	imes 10^{-6} 	ext{ F} = 10 \mu	ext{F}$.Thus, $R = 1 	ext{ k}\Omega$ and $C = 10 \mu	ext{F}$.

When an $AC$ source of emf $E$ with angular frequency $\omega = 100 \text{ rad/s}$ is connected across a circuit, the phase difference between $E$ and current $I$ in the circuit is observed to be $\frac{\pi}{4}$ as shown in the figure. If the circuit consists of only $RC$ or $RL$ in series, then:

Similar Questions

Switch $S$ is closed at $t = 0$. After a sufficiently long time,an iron rod is inserted into the inductor $L$. Then,the light bulb:

When a current of $4 A$ at $50 Hz$ is passed through a coil,the power consumed by the coil is $240 W$. If the voltage of the $AC$ source is $100 V$,what is the inductance of the coil?

The following series $L-C-R$ circuit,when driven by an emf source of angular frequency $70 \text{ krad/s}$,behaves effectively as:

$A$ coil of inductance $0.50 \; H$ and resistance $100 \; \Omega$ is connected to a $240 \; V, 50 \; Hz$ $AC$ supply.
$(a)$ What is the maximum current in the coil?
$(b)$ What is the time lag between the voltage maximum and the current maximum?

$A$ coil has a resistance of $30\,\Omega$ and an inductive reactance of $20\,\Omega$ at a frequency of $50\,Hz$. If an $AC$ source of $200\,V$ and $100\,Hz$ is connected across the coil,the current in the coil will be.......$A$

Vedclass Test Series

Exam Paper Generator

Online Exam Module