When subjected to a voltage of 10 , V, the cu | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) Given: Voltage $V = 10 \, V$, initial current $I_1 = 0.1 \, A$, initial temperature $t_1 = 40^{\circ} C$, and temperature coefficient $\alpha = 2

Vedclass · Accepted Answer

$142$

Vedclass · Answer

(A) Given: Voltage $V = 10 \, V$, initial current $I_1 = 0.1 \, A$, initial temperature $t_1 = 40^{\circ} C$, and temperature coefficient $\alpha = 2 	imes 10^{-4} {}^{\circ} C^{-1}$.The initial resistance $R_1$ at $t_1 = 40^{\circ} C$ is $R_1 = \frac{V}{I_1} = \frac{10}{0.1} = 100 \, \Omega$.The resistance at temperature $t_2$ when the current $I_2 = 0.098 \, A$ is $R_2 = \frac{V}{I_2} = \frac{10}{0.098} \approx 102.04 \, \Omega$.Using the relation $R_2 = R_1 [1 + \alpha(t_2 - t_1)]$:$102.04 = 100 [1 + 2 	imes 10^{-4} (t_2 - 40)]$.$1.0204 = 1 + 2 	imes 10^{-4} (t_2 - 40)$.$0.0204 = 2 	imes 10^{-4} (t_2 - 40)$.$t_2 - 40 = \frac{0.0204}{2 	imes 10^{-4}} = 102$.$t_2 = 102 + 40 = 142^{\circ} C$.

Similar Questions

When a potential difference $V$ is applied across a wire of resistance $R$,it dissipates energy at a rate $W$. If the wire is cut into two halves and these halves are connected in parallel across the same supply,the energy dissipation rate will become:

The electrochemical equivalent of a material in an electrolyte depends on

The current passing through the ideal ammeter in the circuit given below is (in $\text{ A}$)

Two wires of resistances $R_1$ and $R_2$ have temperature coefficients of resistance $\alpha_1$ and $\alpha_2$ respectively. If these are joined in series,the effective temperature coefficient of resistance is:

$A$ current of $1.5\, A$ flows through a copper voltameter. The thickness of copper deposited on the electrode surface of area $50\, cm^2$ in $20\, min$ will be (Density of copper $= 9000\, kg/m^3$ and $E.C.E.$ of copper $= 0.00033\, g/C$).

Vedclass Test Series

Exam Paper Generator

Online Exam Module