$A$ wire of area of cross-section $10^{-6} \ m^2$ is increased in length by $0.1 \%$. The tension produced is $1000 \ N$. The Young's modulus of the wire is:

When a stress of $10^8 \, N m^{-2}$ is applied to a suspended wire,its length increases by $1 \, mm$. If the original length of the wire is $1 \, m$,calculate the Young's modulus of the wire.

Two wires each of radius $0.2\,cm$ and negligible mass, one made of steel and the other made of brass, are loaded as shown in the figure. The elongation of the steel wire is $.........\times 10^{-6}\,m$. [Young's modulus for steel $= 2 \times 10^{11}\,N/m^2$ and $g = 10\,m/s^2$]

$A$ wire is stretched $1 \ mm$ by a force $F$. If a second wire of same material,same length and $4$ times the diameter of the first wire is stretched by the same force $F$,then the elongation of the second wire is

Under the same load,wire $A$ having length $5.0 \, m$ and cross-section $2.5 \times 10^{-5} \, m^2$ stretches uniformly by the same amount as another wire $B$ of length $6.0 \, m$ and a cross-section of $3.0 \times 10^{-5} \, m^2$ stretches. The ratio of the Young's modulus of wire $A$ to that of wire $B$ will be

$A$ rod is fixed between two points at $20\,^oC$. The coefficient of linear expansion of the material of the rod is $1.1 \times 10^{-5}/\,^oC$ and Young's modulus is $1.2 \times 10^{11}\,N/m^2$. Find the stress developed in the rod if the temperature of the rod becomes $10\,^oC$.