$A$ $2 \ m$ long rod of radius $1 \ cm$,which is fixed from one end,is given a twist of $0.8 \ radian$. The shear strain developed (in radian) will be $:-$

$A$ cube has side length $5$ cm and modulus of rigidity $10^5$ $N$/m$^2$. The displacement produced by a force of $10$ $N$ in the upper face of cube is . . . . . . mm.

$A$ wire of length $1 \text{ m}$ and radius $2 \text{ mm}$ is vertically clamped. The lower end is twisted through an angle of $45^{\circ}$. The angle of shear is $.....$ (in $^{\circ}$)

$A$ rectangular metallic block of dimensions $40 \text{ mm} \times 20 \text{ mm}$ when pulled with a tension of $50 \text{ kN}$ undergoes only elastic deformation. The strain in the block is (The shear modulus of the material of the block is $40 \times 10^9 \text{ Nm}^{-2}$)

The upper end of a wire of radius $4 \, mm$ and length $100 \, cm$ is clamped and its other end is twisted through an angle of $60^o$. The angle of shear is .......... $^o$.

As shown in the figure,forces of $10^5\,N$ each are applied in opposite directions on the upper and lower faces of a cube of side $10\,cm$,shifting the upper face parallel to itself by $0.5\,cm$. If the side of another cube of the same material is $20\,cm$,then under similar conditions as above,the displacement will be ......... $cm$.