$A$ composite slab consists of two materials having coefficients of thermal conductivity $K$ and $2K$,thickness $x$ and $4x$ respectively. The temperatures of two outer surfaces of the composite slab are $T_2$ and $T_1$ respectively $(T_2 > T_1)$. The rate of heat transfer through the slab in a steady state is $\left[\frac{A(T_2 - T_1)K}{x}\right] f$,where $f$ is equal to:

Two slabs $A$ and $B$ of equal surface area are placed one over the other such that their surfaces are completely in contact. The thickness of slab $A$ is twice that of $B$. The coefficient of thermal conductivity of slab $A$ is twice that of $B$. The first surface of slab $A$ is maintained at $100^{\circ} C$, while the second surface of slab $B$ is maintained at $25^{\circ} C$. The temperature at the contact of their surfaces is (in $^{\circ} C$)

Three rods $A, B$ and $C$ of thermal conductivities $K, 2K$ and $4K$,cross-sectional areas $A, 2A$ and $2A$ and lengths $2l, l$ and $l$ respectively are connected as shown in the figure. If the ends of the rods are maintained at temperatures $100^{\circ}C, 50^{\circ}C$,and $0^{\circ}C$ respectively,then the temperature $\theta$ of the junction is ......... $^{\circ}C$

An iron bar $(L_{1}=0.1 \; m, A_{1}=0.02 \; m^{2}, K_{1}=79 \; W m^{-1} K^{-1})$ and a brass bar $(L_{2}=0.1 \; m, A_{2}=0.02 \; m^{2}, K_{2}=109 \; W m^{-1} K^{-1})$ are soldered end to end as shown in the figure. The free ends of the iron bar and brass bar are maintained at $373 \; K$ and $273 \; K$ respectively. Obtain expressions for and hence compute:
$(i)$ the temperature of the junction of the two bars,
$(ii)$ the equivalent thermal conductivity of the compound bar,and
$(iii)$ the heat current through the compound bar.

Six identical conducting rods are joined as shown. The ends $A$ and $D$ are maintained at $200\,^{\circ}C$ and $20\,^{\circ}C$ respectively. No heat is lost to the surroundings. The temperature of the junction $C$ will be ........ $^{\circ}C$.

Six identical conducting rods are joined as shown in the figure. Points $A$ and $D$ are maintained at temperatures of $200^oC$ and $20^oC$ respectively. The temperature of junction $B$ will be ....... $^oC$.