$A$ stretched wire of a material whose Young's modulus $Y = 2 \times 10^{11} \ Nm^{-2}$ has Poisson's ratio $\sigma = 0.25$. Its lateral strain is $\varepsilon_l = 10^{-3}$. The elastic energy density of the wire is:

Stress required in a wire to produce $0.1\%$ strain is $4 \times 10^8 \, N/m^2$. Its Young's modulus is $Y_1$. If stress required in another wire to produce $0.3\%$ strain is $6 \times 10^8 \, N/m^2$,and its Young's modulus is $Y_2$,which relation is correct?

$A$ uniform plank of Young's modulus $Y$ is moved over a smooth horizontal surface by a constant horizontal force $F$. The area of cross-section of the plank is $A$. The compressive strain on the plank in the direction of the force is

$A$ steel wire is $1 \,m$ long and $1 \,mm^2$ in area of cross-section. If it takes $200 \,N$ to stretch this wire by $1 \,mm$,how much force will be required to stretch a wire of the same material as well as diameter from its normal length of $10 \,m$ to a length of $1002 \,cm$?

If the density of the material increases,the value of Young's modulus

$A$ steel rod of length $1\,m$ and cross-sectional area $10^{-4}\,m^2$ is heated from $0^{\circ}C$ to $200^{\circ}C$ without being allowed to extend or bend. The compressive force produced in the rod is $........\times 10^4\,N$. (Given: Young's modulus of steel $Y = 2 \times 10^{11}\,N/m^2$,coefficient of linear expansion $\alpha = 10^{-5}\,K^{-1}$)