A 500 ,g ball is attached to one end of an al | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) Let $L = 1.4 \,m$ be the unstretched length,$A = 0.5 \,mm^2 = 0.5 	imes 10^{-6} \,m^2$ be the area,$m = 0.5 \,kg$ be the mass,and $	heta = 30^{\

Vedclass · Accepted Answer

$0.4$

Vedclass · Answer

(D) Let $L = 1.4 \,m$ be the unstretched length,$A = 0.5 \,mm^2 = 0.5 	imes 10^{-6} \,m^2$ be the area,$m = 0.5 \,kg$ be the mass,and $	heta = 30^{\circ}$ be the angle with the horizontal.Let $r$ be the radius of the horizontal circle and $l$ be the stretched length of the wire.From geometry,$r = l \cos 	heta$ and $h = l \sin 	heta$.The forces acting on the ball are tension $T$ in the wire,gravity $mg$,and centripetal force $m \omega^2 r$.For vertical equilibrium: $T \sin 	heta = mg$.Thus,$T = \frac{mg}{\sin 30^{\circ}} = \frac{0.5 	imes 10}{0.5} = 10 \,N$.Using Young's modulus formula: $Y = \frac{T L}{A \Delta L}$,where $\Delta L$ is the extension.$\Delta L = \frac{T L}{A Y} = \frac{10 	imes 1.4}{0.5 	imes 10^{-6} 	imes 0.7 	imes 10^{11}}$.$\Delta L = \frac{14}{0.35 	imes 10^5} = \frac{14}{35000} = 0.0004 \,m$.Converting to $mm$: $\Delta L = 0.0004 	imes 1000 = 0.4 \,mm$.

Similar Questions

Two wires $A$ and $B$ are of the same material. Their lengths are in the ratio $1: 2$ and diameters are in the ratio $2: 1$. When stretched by forces $F_{A}$ and $F_{B}$ respectively,they get equal increase in their lengths. Then the ratio $F_{A} / F_{B}$ is

$A$ uniform rod of mass $m$,length $L$,area of cross-section $A$ and Young's modulus $Y$ hangs from the ceiling. Its elongation under its own weight will be

$A$ force $F$ is applied on a wire of radius $r$ and length $L$,and the change in the length of the wire is $l$. If the same force $F$ is applied on a wire of the same material with radius $2r$ and length $2L$,then what is the change in the length of the second wire?

Two wires $A$ and $B$ of same length, same radius and same Young's modulus are heated to the same range of temperatures. If the coefficient of linear expansion of $A$ is $\frac{3}{2}$ times that of $B$, then the ratio of the thermal stresses produced in the two wires $A$ and $B$ is

The length of a metal wire is $L_1$ when the tension is $T_1$ and $L_2$ when the tension is $T_2$. The unstretched length of the wire is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module