$A$ force $F$ is applied on a wire of radius $r$ and length $L$,and the change in the length of the wire is $l$. If the same force $F$ is applied on a wire of the same material with radius $2r$ and length $2L$,then what is the change in the length of the second wire?

$A$ rigid bar of mass $15\; kg$ is supported symmetrically by three wires each $2.0\; m$ long. Those at each end are of copper and the middle one is of iron. Determine the ratio of their diameters if each is to have the same tension.

$A$ copper wire of length $1.0\, m$ and a steel wire of length $0.5\, m$ having equal cross-sectional areas are joined end to end. The composite wire is stretched by a certain load which stretches the copper wire by $1\, mm$. If the Young's moduli of copper and steel are respectively $1.0 \times 10^{11}\, N/m^2$ and $2.0 \times 10^{11}\, N/m^2$,the total extension of the composite wire is ........ $mm$.

The force required to stretch a steel wire of $1\,cm^2$ cross-section to $1.1$ times its original length is $(Y = 2 \times 10^{11}\,N/m^2)$.

When a force of $4 \, N$ is applied to a wire,its length is $a \, m$. When a force of $5 \, N$ is applied,its length is $b \, m$. What will be its length when a force of $9 \, N$ is applied?

Three bars having lengths $l, 2l$,and $3l$ and areas of cross-section $A, 2A$,and $3A$ are joined rigidly end to end. The compound rod is subjected to a stretching force $F$. The total increase in the length of the rod is (Young's modulus of the material is $Y$ and the bars are massless).