$A$ steel rod with a circular cross-section of diameter $1 \ cm$ and another steel rod with a square cross-section of side $1 \ cm$ have equal mass. If the two rods are subjected to the same tension, the ratio of the elongations of the two rods is

The length of a metal wire is found to be $L_1$ and $L_2$ when the tensions $T_1$ and $T_2$ are applied to it respectively. The natural length of the wire is

The Young's modulus of a wire of length $L$ and radius $r$ is $Y \, N/m^2$. What will be the Young's modulus of a wire made of the same material with length $L/2$ and radius $r/2$?

Two exactly similar wires of steel and copper are stretched by equal forces. If the total elongation is $2 \,cm$,then how much is the elongation in steel and copper wire respectively? Given,$Y_{\text{steel}} = 20 \times 10^{11} \,dyne/cm^2$,$Y_{\text{copper}} = 12 \times 10^{11} \,dyne/cm^2$.

Longitudinal stress of $1\,kg/mm^2$ is applied on a wire. The percentage increase in length is $(Y = 10^{11}\,N/m^2)$. (in $\%$)

There is some change in length when a $33000 \,N$ tensile force is applied on a steel rod of area of cross-section $10^{-3} \,m^2$. The change of temperature required to produce the same elongation, if the steel rod is heated, is (The modulus of elasticity is $3 \times 10^{11} \,N/m^2$ and the coefficient of linear expansion of steel is $1.1 \times 10^{-5} /{ }^{\circ}C$). (in $^{\circ}C$)