A rectangular ice box of total surface area o | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The rate of heat flow $dQ/dt$ through the walls is given by the formula: $dQ/dt = (K \cdot A \cdot \Delta T) / d$. Here, $K = 10^{-2} \,W m^{-1} K

Vedclass · Accepted Answer

$0.9$

Vedclass · Answer

(B) The rate of heat flow $dQ/dt$ through the walls is given by the formula: $dQ/dt = (K \cdot A \cdot \Delta T) / d$. Here, $K = 10^{-2} \,W m^{-1} K^{-1}$, $A = 1000 \,cm^2 = 0.1 \,m^2$, $\Delta T = 42^{\circ}C - 0^{\circ}C = 42 \,K$, and $d = 2 \,mm = 2 	imes 10^{-3} \,m$. Substituting these values: $dQ/dt = (10^{-2} 	imes 0.1 	imes 42) / (2 	imes 10^{-3}) = (4.2 	imes 10^{-2}) / (2 	imes 10^{-3}) = 21 \,W$ (or $21 \,J/s$). Total time $t = 160 \,minutes = 160 	imes 60 \,s = 9600 \,s$. Total heat transferred $Q = (dQ/dt) 	imes t = 21 	imes 9600 = 201600 \,J$. Mass of ice melted $m_{melted} = Q / L$, where $L = 336 	imes 10^3 \,J/kg$. $m_{melted} = 201600 / (336 	imes 10^3) = 0.6 \,kg$. Mass of ice remaining = Initial mass - Mass melted = $1.5 \,kg - 0.6 \,kg = 0.9 \,kg$.

Similar Questions

Two layers of a wall,$A$ and $B$,are made of different materials. Both layers have the same thickness. For layer $A$,the thermal conductivity is $K_A = 3 K_B$. The total temperature difference across the wall is $20^{\circ}C$. Find the temperature difference across layer $A$ in $^{\circ}C$.

$A$ $5 \ cm$ thick ice block is present on the surface of water in a lake. The temperature of the air is $-10^{\circ}C$. How much time will it take to double the thickness of the block? (Given: $L = 80 \ cal/g$,$K_{ice} = 0.004 \ cal/s \cdot cm \cdot ^{\circ}C$,$\rho_{ice} = 0.92 \ g/cm^3$)

If the thermal conductivity of aluminum is $0.5 \ cal/cm \cdot s \cdot ^\circ C$,then the temperature gradient required to conduct $10 \ cal/s \cdot cm^2$ in the steady state is ...... $^\circ C/cm$.

Two metal rods $1$ and $2$ of same lengths have same temperature difference between their ends. Their thermal conductivities are $K_1$ and $K_2$ and cross-sectional areas are $A_1$ and $A_2$,respectively. If the rate of heat conduction in rod $1$ is four times that in rod $2$,then:

The coefficient of thermal conductivity of a metal rod depends on its

Vedclass Test Series

Exam Paper Generator

Online Exam Module