A Zener diode having breakdown voltage V_z = | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The voltage across the series resistor $R_s$ is given by $V_{R_s} = V_{in} - V_z = 10 \, V - 6 \, V = 4 \, V$.For the Zener diode to act as a volt

Vedclass · Accepted Answer

$400$

Vedclass · Answer

(B) The voltage across the series resistor $R_s$ is given by $V_{R_s} = V_{in} - V_z = 10 \, V - 6 \, V = 4 \, V$.For the Zener diode to act as a voltage regulator, it must maintain a minimum current $I_{z,min} = 10 \, mA$ even when the load current $I_L$ is zero.The total current $I$ flowing through $R_s$ is $I = I_z + I_L$.To find the maximum value of $R_s$, we consider the condition where the load current $I_L$ is minimum (i.e., $I_L = 0$).Thus, $I = I_{z,min} = 10 \, mA$.Using Ohm's law, $R_s = \frac{V_{R_s}}{I} = \frac{4 \, V}{10 \, mA} = \frac{4 \, V}{10 	imes 10^{-3} \, A} = 400 \, \Omega$.Therefore, the maximum value of $R_s$ is $400 \, \Omega$.

Similar Questions

$A$ Zener diode having a breakdown voltage equal to $5 \, V$ is used in the voltage regulator circuit shown in the figure. The current through the diode is ........ $mA$.

$A$ Zener diode having a breakdown voltage of $5.6 \ V$ is connected in reverse bias with a battery of emf $10 \ V$ and a resistance of $100 \ \Omega$ in series. The current flowing through the Zener diode is (in $mA$)

When the $Zener$ diode is used as a voltage regulator, it is connected in

An experiment is performed to determine the $I-V$ characteristics of a Zener diode,which has a protective resistance of $R = 100 \,\Omega$ and a maximum power dissipation rating of $P = 1 \,W$. The minimum voltage range of the $DC$ source in the circuit is

Zener breakdown occurs in a $p-n$ junction having $p$ and $n$ both :

Vedclass Test Series

Exam Paper Generator

Online Exam Module