$A$ metal utensil is generally preferred for cooking because ......

The ends of two rods of different materials with their thermal conductivities,radii of cross-sections,and lengths all in the ratio $1:2$ are maintained at the same temperature difference. If the rate of flow of heat in the larger rod is $4 \; cal/sec$,the rate of flow of heat in the shorter rod in $cal/sec$ will be:

$A$ copper pipe of length $10 \,m$ carries steam at temperature $110^{\circ} C$. The outer surface of the pipe is maintained at a temperature $10^{\circ} C$. The inner and outer radii of the pipe are $2 \,cm$ and $4 \,cm$,respectively. The thermal conductivity of copper is $0.38 \,kW / m /^{\circ} C$. In the steady state,the rate at which heat flows radially outward through the pipe is closest to ............. $\,kW$.

$A$ cylindrical copper rod of length $2 \,m$ and cross-sectional area $2 \,cm^2$ is insulated at its curved surface. One end of the rod is maintained in a steam chamber at $100^{\circ} C$ and the other is maintained in ice at $0^{\circ} C$. The thermal conductivity of copper is $386 \,Js^{-1} \,m^{-1} {}^{\circ} C^{-1}$. Find the temperature at a point which is at a distance of $120 \,cm$ from the colder end. (in $^{\circ} C$)

The thermal conductivity of copper is $9$ times that of steel. Find the temperature of the junction of copper and steel in the composite rod as shown in the figure (in $^oC$).

The rate of heat conduction through a cylindrical rod is $Q_1$. The temperatures at the ends of the rod are $T_1$ and $T_2$. If all the dimensions of the rod are doubled while keeping the temperatures the same,the new rate of heat conduction is $Q_2$. Then: