The drift velocity of electrons in a conducti | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The drift velocity $v_d$ of electrons is very small (typically $10^{-3} \, m/s$).However,the electric field is established throughout the entire l

Vedclass · Accepted Answer

The electric field is established in the wire very rapidly,and the current produced through every cross-section is almost instantaneous.

Vedclass · Answer

(C) The drift velocity $v_d$ of electrons is very small (typically $10^{-3} \, m/s$).However,the electric field is established throughout the entire length of the wire at the speed of light $(c \approx 3 	imes 10^8 \, m/s)$ as soon as the switch is closed.This electric field exerts a force on all free electrons in the wire simultaneously,causing them to drift and establishing a current throughout the circuit almost instantaneously.Therefore,the bulb glows immediately because the electric field propagates rapidly,not because individual electrons travel from the switch to the bulb.

The drift velocity of electrons in a conducting wire is of the order of $1 \, mm/s$. However,when the switch is turned on,the bulb glows almost instantaneously. This is because:

Similar Questions

Define mobility and write its $SI$ unit.

$A$ copper wire of cross-sectional area $1.0 \ mm^2$ carries a current of $1.34 \ A$. Assuming that each copper atom contributes one free electron,calculate the drift velocity of the free electrons in the wire in $mm/s$. (Given: density of copper = $8990 \ kg/m^3$,atomic mass = $63.50 \ g/mol$)

$A$ copper wire of length $1 \ m$ and radius $1 \ mm$ is connected in series with an iron wire of length $2 \ m$ and radius $3 \ mm$. If a current flows through both wires,the ratio of the current density in the copper wire to that in the iron wire will be:

$A$ current $I$ is passing through a wire having two sections $P$ and $Q$ of uniform diameters $d$ and $d/2$ respectively. If the mean drift velocity of electrons in sections $P$ and $Q$ is denoted by $v_P$ and $v_Q$ respectively,then

The drift speed of electrons in a material is found to be $0.3 \ m s^{-1}$ when an electric field of $2 \ V m^{-1}$ is applied across it. The electron mobility (in $m^2 \ V^{-1} \ s^{-1}$) in the material is

Vedclass Test Series

Exam Paper Generator

Online Exam Module