The cross-sections of wires made of the same | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The resistance of a wire is given by $R = \rho \frac{l}{A}$,where $\rho$ is the resistivity,$l$ is the length,and $A$ is the cross-sectional area.

Vedclass · Accepted Answer

$R_A = R_B = R_C$

Vedclass · Answer

(A) The resistance of a wire is given by $R = \rho \frac{l}{A}$,where $\rho$ is the resistivity,$l$ is the length,and $A$ is the cross-sectional area.Since all wires are made of the same material ($\rho$ is constant) and have the same length ($l$ is constant),the resistance depends only on the cross-sectional area $A$.For wire $A$: The cross-section is a square frame with outer side $\sqrt{3}a$ and inner side $\sqrt{2}a$. Area $A_A = (\sqrt{3}a)^2 - (\sqrt{2}a)^2 = 3a^2 - 2a^2 = a^2$.For wire $B$: The cross-section is a square frame with outer side $\sqrt{2}a$ and inner side $a$. Area $A_B = (\sqrt{2}a)^2 - (a)^2 = 2a^2 - a^2 = a^2$.For wire $C$: The cross-section is a solid square with side $a$. Area $A_C = a^2$.Since $A_A = A_B = A_C = a^2$,it follows that $R_A = R_B = R_C$.

The cross-sections of wires made of the same material and having the same length are shown in the figure. What can be said about their resistances?

Similar Questions

At room temperature $(27^{\circ} C)$,the resistance of a heating element is $50 \Omega$. The temperature coefficient of the material is $2.4 \times 10^{-4} { }^{\circ} C^{-1}$. The temperature of the element,when its resistance is $62 \Omega$,is $\qquad$ ${ }^{\circ} C$.

The masses of three wires of copper are in the ratio of $1 : 3 : 5$ and their lengths are in the ratio $5 : 3 : 1.$ The ratio of their electrical resistances is

$A$ uniform wire of length $l$ and radius $r$ has a resistance of $100\, \Omega$. It is recast into a wire of radius $\frac{r}{2}$. The resistance of the new wire will be ............... $\Omega$.

The resistance of a wire is $20 \Omega$. It is stretched,so that the length becomes three times,then the new resistance of the wire will be (in $\Omega$)

An aluminium (resistivity $\rho = 2.2 \times 10^{-8} \Omega \cdot m$) wire of diameter $1.4 \text{ mm}$ is used to make a $4 \Omega$ resistor. The length of the wire is: (in $\text{ m}$)

Vedclass Test Series

Exam Paper Generator

Online Exam Module