A load of mass M kg is suspended from a stee | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) In the first case,the tension in the wire is $T_1 = Mg$. The extension $\Delta \ell_1$ is given by $\Delta \ell_1 = \frac{MgL}{AY}$,where $L$ is t

Vedclass · Accepted Answer

$3$

Vedclass · Answer

(A) In the first case,the tension in the wire is $T_1 = Mg$. The extension $\Delta \ell_1$ is given by $\Delta \ell_1 = \frac{MgL}{AY}$,where $L$ is the length,$A$ is the cross-sectional area,and $Y$ is Young's modulus.Given $\Delta \ell_1 = 4.0 \ mm$.When the load is immersed in a liquid,a buoyant force $B$ acts upwards. The new tension is $T_2 = Mg - B$.The buoyant force $B = V ho_{liquid} g$,where $V$ is the volume of the load.The weight of the load is $Mg = V ho_{load} g$.Thus,$B = Mg \left( \frac{ho_{liquid}}{ho_{load}} ight) = Mg \left( \frac{2}{8} ight) = \frac{1}{4} Mg$.The new tension $T_2 = Mg - \frac{1}{4} Mg = \frac{3}{4} Mg$.The new extension $\Delta \ell_2 = \frac{T_2 L}{AY} = \frac{3}{4} \left( \frac{MgL}{AY} ight) = \frac{3}{4} \Delta \ell_1$.Substituting $\Delta \ell_1 = 4.0 \ mm$,we get $\Delta \ell_2 = \frac{3}{4} 	imes 4.0 \ mm = 3.0 \ mm$.

Similar Questions

Young's moduli of two wires $A$ and $B$ are in the ratio $7 : 4$. Wire $A$ is $2\, m$ long and has radius $R$. Wire $B$ is $1.5\, m$ long and has radius $2\, mm$. If the two wires stretch by the same length for a given load,then the value of $R$ is close to ......... $mm$.

The modulus of elasticity is dimensionally equivalent to

In steel,the Young's modulus and the strain at the breaking point are $2 \times 10^{11} \, N/m^2$ and $0.15$ respectively. The stress at the breaking point for steel is therefore:

Explain the experimental determination of Young's modulus.

Vedclass Test Series

Exam Paper Generator

Online Exam Module