A particle at the end of a spring executes si | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) The time period of a spring-mass system is given by $t = 2\pi \sqrt{\frac{m}{k}}$.For the two springs,we have $t_1 = 2\pi \sqrt{\frac{m}{k_1}}$ an

Vedclass · Accepted Answer

$T^2 = t_1^2 + t_2^2$

Vedclass · Answer

(B) The time period of a spring-mass system is given by $t = 2\pi \sqrt{\frac{m}{k}}$.For the two springs,we have $t_1 = 2\pi \sqrt{\frac{m}{k_1}}$ and $t_2 = 2\pi \sqrt{\frac{m}{k_2}}$.Squaring these,we get $t_1^2 = 4\pi^2 \frac{m}{k_1}$ and $t_2^2 = 4\pi^2 \frac{m}{k_2}$.When two springs are connected in series,the effective spring constant $k$ is given by $\frac{1}{k} = \frac{1}{k_1} + \frac{1}{k_2}$,which implies $k = \frac{k_1 k_2}{k_1 + k_2}$.The time period $T$ for the series combination is $T = 2\pi \sqrt{\frac{m}{k}}$.Squaring this,$T^2 = 4\pi^2 \frac{m}{k} = 4\pi^2 m \left( \frac{1}{k} \right) = 4\pi^2 m \left( \frac{1}{k_1} + \frac{1}{k_2} \right)$.Substituting the expressions for $t_1^2$ and $t_2^2$,we get $T^2 = 4\pi^2 \frac{m}{k_1} + 4\pi^2 \frac{m}{k_2} = t_1^2 + t_2^2$.

$A$ particle at the end of a spring executes simple harmonic motion with a period $t_1$,while the corresponding period for another spring is $t_2$. If the period of oscillation with the two springs in series is $T$,then

Similar Questions

On a smooth inclined plane,a mass $M$ is attached between two massless springs of force constant $k$ each,as shown in the figure. The other ends of the springs are fixed to firm supports. The period of oscillation of the mass $M$ is

Two bodies $A$ and $B$ of equal masses are suspended from two separate springs of force constants $k_1$ and $k_2$ respectively. If the two bodies oscillate such that their maximum velocities are equal,the ratio of the amplitudes of oscillation of $A$ and $B$ will be

The graph shown was obtained from experimental measurements of the period of oscillations $T$ for different masses $M$ placed in the scale pan on the lower end of the spring balance. The most likely reason for the line not passing through the origin is that the

Vedclass Test Series

Exam Paper Generator

Online Exam Module