A slender rod of mass M and length L is hinge | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) Let $S$ be the area of the cross-section of the rod.The linear mass density $\lambda(x)$ varies linearly from $\rho_0$ at $x=0$ to $2\rho_0$ at $x

Vedclass · Accepted Answer

$\frac{7ML^2}{18}$

Vedclass · Answer

(C) Let $S$ be the area of the cross-section of the rod.The linear mass density $\lambda(x)$ varies linearly from $\rho_0$ at $x=0$ to $2\rho_0$ at $x=L$.Thus,$\lambda(x) = S \cdot \rho(x) = S \left( \rho_0 + \frac{2\rho_0 - \rho_0}{L} x \right) = S \left( \rho_0 + \frac{\rho_0}{L} x \right)$.The total mass $M$ is given by:$M = \int_{0}^{L} \lambda(x) dx = S \int_{0}^{L} \left( \rho_0 + \frac{\rho_0}{L} x \right) dx = S \rho_0 \left[ x + \frac{x^2}{2L} \right]_{0}^{L} = S \rho_0 \left( L + \frac{L}{2} \right) = \frac{3}{2} S \rho_0 L$.Therefore,$S \rho_0 = \frac{2M}{3L}$.The moment of inertia $I$ about the hinge is:$I = \int_{0}^{L} x^2 dm = \int_{0}^{L} x^2 \lambda(x) dx = S \int_{0}^{L} x^2 \left( \rho_0 + \frac{\rho_0}{L} x \right) dx$.$I = S \rho_0 \int_{0}^{L} \left( x^2 + \frac{x^3}{L} \right) dx = S \rho_0 \left[ \frac{x^3}{3} + \frac{x^4}{4L} \right]_{0}^{L} = S \rho_0 \left( \frac{L^3}{3} + \frac{L^3}{4} \right) = S \rho_0 \left( \frac{7L^3}{12} \right)$.Substituting $S \rho_0 = \frac{2M}{3L}$:$I = \left( \frac{2M}{3L} \right) \left( \frac{7L^3}{12} \right) = \frac{14ML^2}{36} = \frac{7ML^2}{18}$.

$A$ slender rod of mass $M$ and length $L$ is hinged at one end to swing freely in a vertical plane. Its density is non-uniform and varies linearly from the hinged end to the free end,doubling its value. The moment of inertia of the rod about the rotation axis passing through the hinge point is:

Similar Questions

Four masses are attached to a light circular frame of radius $a$ as shown in the figure. The radius of gyration of this system about an axis passing through the center $O$ of the circular frame and perpendicular to its plane is:

Two circular loops $P$ and $Q$ of radii $r$ and $nr$ are made respectively from a uniform wire. The moment of inertia of loop $Q$ about its axis is four times that of loop $P$ about its axis. The value of $n$ is

Two circular loops $P$ and $Q$ are made from a uniform wire. The radii of $P$ and $Q$ are $R_1$ and $R_2$ respectively. The moments of inertia about their own axis are $I_{P}$ and $I_{Q}$ respectively. If $\frac{I_{P}}{I_{Q}}=\frac{1}{8}$,then $\frac{R_2}{R_1}$ is

$A$ wire of mass $m$ and length $l$ is bent in the form of a circular ring. The moment of inertia of the ring about its axis is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module