Consider a steady flow of oil in a pipeline. | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(A) The Reynolds number for a fluid flow is given by $R_e = \frac{2 v \rho r}{\eta}$, where $v$ is the velocity of flow, $\rho$ is the density of the

Vedclass · Accepted Answer

$\frac{1}{e}$

Vedclass · Answer

(A) The Reynolds number for a fluid flow is given by $R_e = \frac{2 v ho r}{\eta}$, where $v$ is the velocity of flow, $ho$ is the density of the fluid, $r$ is the radius of the tube, and $\eta$ is the viscosity of the fluid.From the equation of continuity, $A_1 v_1 = A_2 v_2$, where $A = \pi r^2$. Thus, $\pi r_1^2 v_1 = \pi r_2^2 v_2$, which implies $\frac{v_1}{v_2} = \frac{r_2^2}{r_1^2}$.The ratio of Reynolds numbers is $\frac{R_1}{R_2} = \frac{v_1 r_1}{v_2 r_2} = \left(\frac{r_2^2}{r_1^2}ight) 	imes \left(\frac{r_1}{r_2}ight) = \frac{r_2}{r_1}$.Given $r = r_0 e^{-\alpha x}$, we have $r_1 = r_0 e^{-\alpha x_1}$ and $r_2 = r_0 e^{-\alpha (x_1 + 3)}$.Substituting these values, $\frac{R_1}{R_2} = \frac{r_0 e^{-\alpha (x_1 + 3)}}{r_0 e^{-\alpha x_1}} = e^{-\alpha (x_1 + 3) + \alpha x_1} = e^{-3 \alpha}$.Given $\alpha = \frac{1}{3} 	ext{ m}^{-1}$, we get $\frac{R_1}{R_2} = e^{-3(1/3)} = e^{-1} = \frac{1}{e}$.

Similar Questions

Two capillary tubes of same length each of $50 \ cm$ but of different radii $4 \ mm$ and $2 \ mm$ are connected in series. When water flows,the pressure difference between the ends of the arrangement is $P$. Then the pressure difference between the ends of the first tube is

If the pressure difference across a pipe of radius $r$ and length $l$ is $p$,then the volume of liquid flowing out per second is $V$. Find the correct expression for $V$.

The rate of flow of water in a capillary tube of length $\ell$ and radius $r$ is $V.$ The rate of flow in another capillary tube of length $2 \ell$ and radius $2 r$ for the same pressure difference would be $....V$

What is critical velocity? Write its equation.

$A$ liquid flows through a pipe with a pressure difference of $P$. What should be the pressure difference required to maintain the same flow rate if the radius is doubled and the length is doubled?

Vedclass Test Series

Exam Paper Generator

Online Exam Module