What are the differences between mechanics and thermodynamics?
(N/A) Mechanics deals with the motion of particles or bodies under the action of forces and torques. It focuses on the mechanical state of a system,such as its position,velocity,and kinetic energy.
Thermodynamics,on the other hand,is concerned with the internal macroscopic state of a system,defined by state variables like pressure,volume,and temperature. It does not focus on the motion of the system as a whole.
For example,when a bullet is fired from a gun,its mechanical state (kinetic energy) changes. However,when the bullet hits a piece of wood and stops,its kinetic energy is converted into internal energy (heat),which changes the temperature of both the bullet and the wood.
In summary,temperature is related to the energy of the internal,disordered motion of particles,whereas mechanics is concerned with the ordered motion of the system as a whole.
Thermodynamics,on the other hand,is concerned with the internal macroscopic state of a system,defined by state variables like pressure,volume,and temperature. It does not focus on the motion of the system as a whole.
For example,when a bullet is fired from a gun,its mechanical state (kinetic energy) changes. However,when the bullet hits a piece of wood and stops,its kinetic energy is converted into internal energy (heat),which changes the temperature of both the bullet and the wood.
In summary,temperature is related to the energy of the internal,disordered motion of particles,whereas mechanics is concerned with the ordered motion of the system as a whole.
Explore More
Similar Questions
$A$ gas may expand either adiabatically or isothermally. $A$ number of $P-V$ curves are drawn for the two processes over different ranges of pressure and volume. It will be found that:
Easy
View SolutionAn ideal gas,initially in state $(P_{12}, V_1, T_1)$ is expanded isobarically to $(P_{12}, V_2, T_2)$,then adiabatically to $(P_{34}, V_3, T_3)$. It is then contracted isobarically to $(P_{34}, V_4, T_4)$ and finally adiabatically back to the initial state. The efficiency of this cycle is
An ideal gas is subjected to a cyclic process involving four thermodynamic states. The amounts of heat $(Q)$ and work $(W)$ involved in each of these states are:
$Q_1 = 6000 \ J, Q_2 = -5500 \ J, Q_3 = -3000 \ J, Q_4 = 3500 \ J$
$W_1 = 2500 \ J, W_2 = -1000 \ J, W_3 = -1200 \ J, W_4 = x \ J$
The ratio of the net work done by the gas to the total heat absorbed by the gas is $\eta$. The values of $x$ and $\eta$ respectively are:
$Q_1 = 6000 \ J, Q_2 = -5500 \ J, Q_3 = -3000 \ J, Q_4 = 3500 \ J$
$W_1 = 2500 \ J, W_2 = -1000 \ J, W_3 = -1200 \ J, W_4 = x \ J$
The ratio of the net work done by the gas to the total heat absorbed by the gas is $\eta$. The values of $x$ and $\eta$ respectively are:
DifficultAP EAMCET 2009
View SolutionAn ideal gas is taken from state $1$ to state $2$ through optional paths $A, B, C$ and $D$ as shown in the $P-V$ diagram. Let $Q, W$ and $\Delta U$ represent the heat supplied,work done,and change in internal energy of the gas,respectively. Then:
Consider two containers $A$ and $B$ containing monoatomic gases at the same Pressure $(P)$,Volume $(V)$ and Temperature $(T)$. The gas in $A$ is compressed isothermally to $\frac{1}{8}$ of its original volume while the gas $B$ is compressed adiabatically to $\frac{1}{8}$ of its original volume. The ratio of final pressure of gas in $B$ to that of gas in $A$ is ...........
Vedclass Products
For Students
Vedclass Test Series
Mock tests in real JEE/NEET style with performance analysis. 5-day free trial.
Start Free TrialFor Teachers
Exam Paper Generator
Generate Set A/B/C/D exam papers from 7.5L+ questions in 2 minutes. 3 chapters free.
Try FreeFor Institutes
Online Exam Module
Live online exams with unlimited students, 360° analytics & white-label branding.
See Demo