Five rods of same dimensions are arranged as shown in the figure. They have thermal conductivities $K_1, K_2, K_3, K_4$ and $K_5$. When points $A$ and $B$ are maintained at different temperatures,no heat flows through the central rod if

Three rods of equal length and cross-sectional area with thermal conductivities $K, 2K$,and $3K$ are joined as shown in the figure. The temperatures of their outer ends are $110\ ^oC, 20\ ^oC$,and $0\ ^oC$ respectively. Find the temperature of the junction in $^oC$.

One end of a copper rod of length $1.0 \; m$ and area of cross-section $10^{-3} \; m^2$ is immersed in boiling water and the other end in ice. If the coefficient of thermal conductivity of copper is $92 \; cal/(m \cdot s \cdot ^\circ C)$ and the latent heat of ice is $8 \times 10^4 \; cal/kg$,then the amount of ice which will melt in one minute is:

$A$ rod of length $10 \, cm$ has a cross-sectional area of $100 \, cm^2$ and a thermal conductivity of $400 \, W/m^\circ C$. If the heat flow through the rod is $4000 \, J/s$,find the temperature difference between the two ends in $^\circ C$.

$A$ deep rectangular pond of surface area $A$,containing water (density $=\rho$,specific heat capacity $=s$),is located in a region where the outside air temperature is at a steady value of $-26^{\circ}C$. The thickness of the frozen ice layer in this pond at a certain instant is $x$. Taking the thermal conductivity of ice as $K$ and its specific latent heat of fusion as $L$,the rate of increase of the thickness of the ice layer at this instant would be given by:

Three rods of the same dimensions have thermal conductivities $3K, 2K$, and $K$. They are arranged as shown in the figure. The temperature of the junction in the steady state is: