Five wires each of cross-sectional area $A$ and length $l$ are combined as shown. The thermal conductivity of copper and steel are $k_1$ and $k_2$ respectively. The equivalent thermal resistance between $A$ and $C$ is

Two rods of the same length and material transfer a given amount of heat in $12 \, s$ when they are joined in parallel. But when they are joined in series,then they will transfer the same amount of heat under the same conditions in ........ $s$.

Three rods $A, B$ and $C$ of thermal conductivities $K, 2K$ and $4K$,cross-sectional areas $A, 2A$ and $2A$ and lengths $2l, l$ and $l$ respectively are connected as shown in the figure. If the ends of the rods are maintained at temperatures $100^{\circ}C, 50^{\circ}C$,and $0^{\circ}C$ respectively,then the temperature $\theta$ of the junction is ......... $^{\circ}C$

In the following figure,two insulating sheets with thermal resistances $R$ and $3R$ are shown. The temperature $\theta$ at the interface is ...... $^oC$.

$A$ rod $CD$ of thermal resistance $10.0 \; K/W$ is joined at the middle of an identical rod $AB$ as shown in the figure. The ends $A$,$B$,and $D$ are maintained at $200^{\circ}C$,$100^{\circ}C$,and $125^{\circ}C$ respectively. The heat current in $CD$ is $P$ watt. The value of $P$ is ... .

Two plates of the same thickness with coefficients of thermal conductivities $K_1$ and $K_2$ and cross-sectional areas $A_1$ and $A_2$ are connected as shown. Find the effective coefficient of thermal conductivity $K_{eq}$.