For the figure shown,when arcs $ACD$ and $ADB$ are made of the same material,the total heat current carried between $A$ and $B$ is $H$. If $ADB$ is replaced with another material,the total heat current becomes $2H$. If the temperatures at $A$ and $B$ are fixed at $T_1$ and $T_2$,what is the ratio of the new thermal conductivity to the old thermal conductivity of the arc $ADB$?

Four identical rods of the same material are joined end to end to form a square. If the temperature difference between the ends of a diagonal is $100^{\circ}C$,then the temperature difference between the ends of the other diagonal will be ........ $^{\circ}C$.

$A$ hollow sphere of inner radius $R$ and outer radius $2R$ is made of a material of thermal conductivity $K$. It is surrounded by another hollow sphere of inner radius $2R$ and outer radius $3R$ made of the same material of thermal conductivity $K$. The inside of the smaller sphere is maintained at $0^oC$ and the outside of the bigger sphere at $100^oC$. The system is in steady state. The temperature of the interface will be ........ $^oC$.

$A$ composite slab consists of two materials having coefficients of thermal conductivity $K$ and $2K$,and thicknesses $x$ and $4x$ respectively. The temperatures of the two outer surfaces of the composite slab are $T_2$ and $T_1$ $(T_2 > T_1)$. The rate of heat transfer through the slab in a steady state is $\left[\frac{A(T_2 - T_1)K}{x}\right] \cdot f$,where '$f$' is equal to:

Two slabs $A$ and $B$ of equal surface area are placed one over the other such that their surfaces are completely in contact. The thickness of slab $A$ is twice that of $B$. The coefficient of thermal conductivity of slab $A$ is twice that of $B$. The first surface of slab $A$ is maintained at $100^{\circ} C$, while the second surface of slab $B$ is maintained at $25^{\circ} C$. The temperature at the contact of their surfaces is (in $^{\circ} C$)

Rods $x$ and $y$ of equal dimensions but of different materials are joined as shown in the figure. Temperatures of end points $A$ and $F$ are maintained at $100^{\circ}C$ and $40^{\circ}C$ respectively. Given the thermal conductivity of rod $x$ is three times that of rod $y$, the temperatures at junction points $B$ and $E$ are (close to):