Define longitudinal strain and shearing (tang | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) $1$. Longitudinal strain: It is defined as the ratio of the change in length $(\Delta L)$ to the original length $(L)$ of the body. Formula: $	ex

Vedclass · Accepted Answer

Longitudinal strain = $\Delta L / L$,Shearing stress = $F_{tangential}/A$,Hydraulic stress = $P = F/A$

Vedclass · Answer

(C) $1$. Longitudinal strain: It is defined as the ratio of the change in length $(\Delta L)$ to the original length $(L)$ of the body. Formula: $	ext{Longitudinal strain} = \frac{\Delta L}{L}$.$2$. Shearing (tangential) stress: It is the tangential force $(F_{tangential})$ applied per unit area $(A)$ parallel to the surface. Formula: $	ext{Shearing stress} = \frac{F_{tangential}}{A}$.$3$. Hydraulic stress: When a body is submerged in a fluid,it experiences a uniform force from all sides,which is equal to the pressure $(P)$ exerted by the fluid. The magnitude of hydraulic stress is equal to the pressure $P = F/A$.

Define longitudinal strain and shearing (tangential) stress and write their formulas. What is the magnitude of hydraulic stress?

Similar Questions

$A$ rod is placed on a smooth horizontal surface. What is the stress developed when the temperature is increased by $40\,^{\circ}C$?
$[\alpha = 5\, \times\, 10^{-5}\,^{\circ}C^{-1},\, Y = 5\, \times\, 10^{11}\, N/m^2]$

The breaking stress of a wire depends upon

$A$ and $B$ are two wires. The radius of $A$ is twice that of $B$. They are stretched by the same load. Then the stress on $B$ is

The elastic limit of brass is $379\,MPa$. What should be the minimum diameter (in $mm$) of a brass rod if it is to support a $400\,N$ load without exceeding its elastic limit?

The load versus elongation graph for four wires of the same material is shown in the figure. The thinnest wire is represented by the line

Vedclass Test Series

Exam Paper Generator

Online Exam Module