The displacement-time graph of a particle executing $SHM$ is shown. Which of the following statements is wrong?

$A$ small block is connected to one end of a massless spring of un-stretched length $4.9 \ m$. The other end of the spring is fixed at $O$. The system lies on a horizontal frictionless surface. The block is stretched by $0.2 \ m$ and released from rest at $t = 0$. It then executes simple harmonic motion with angular frequency $\omega = \frac{\pi}{3} \ rad/s$. Simultaneously at $t = 0$,a small pebble is projected with speed $v$ from point $P$ at an angle of $45^{\circ}$ as shown in the figure. Point $P$ is at a horizontal distance of $10 \ m$ from $O$. If the pebble hits the block at $t = 1 \ s$,the value of $v$ is (take $g = 10 \ m/s^2$):

$A$ person normally weighing $50\, kg$ stands on a massless platform which oscillates up and down harmonically at a frequency of $2.0\, s^{-1}$ and an amplitude $5.0\, cm$. $A$ weighing machine on the platform gives the person's weight against time.
$(a)$ Will there be any change in the weight of the body during the oscillation?
$(b)$ If the answer to part $(a)$ is yes,what will be the maximum and minimum reading on the machine and at which positions?

$Assertion :$ In simple harmonic motion,the velocity is maximum when the acceleration is minimum.
$Reason :$ Displacement and velocity of $S.H.M.$ differ in phase by $\frac{\pi }{2}$.

In a $SHM$,at which point are the velocity and acceleration both zero?

Two masses $m$ and $\frac{m}{2}$ are connected at the two ends of a massless rigid rod of length $l$. The rod is suspended by a thin wire of torsional constant $k$ at the centre of mass of the rod-mass system (see figure). Because of the torsional constant $k$,the restoring torque is $\tau = k\theta$ for an angular displacement $\theta$. If the rod is rotated by $\theta_0$ and released,the tension in it when it passes through its mean position will be