The range of a voltmeter of resistance $G \ \Omega$ is $V$ volt. The resistance required to be connected in series with it in order to convert it into a voltmeter of range $nV$ volt, will be

The resistance of a galvanometer coil is $R$. What is the shunt resistance required to convert it into an ammeter of range $4$ times?

$A$ galvanometer having internal resistance $10 \Omega$ requires $0.01 \ A$ for a full scale deflection. To convert this galvanometer to a voltmeter of full-scale deflection at $120 \ V$, we need to connect a resistance of

Two moving coil meters,$M_{1}$ and $M_{2}$ have the following particulars:
$R_{1}=10 \,\Omega, \quad N_{1}=30$
$A_{1}=3.6 \times 10^{-3} \,m^{2}, \quad B_{1}=0.25 \,T$
$R_{2}=14 \,\Omega, \quad N_{2}=42$
$A_{2}=1.8 \times 10^{-3} \,m^{2}, \quad B_{2}=0.50 \,T$
(The spring constants are identical for the two meters). Determine the ratio of
$(a)$ current sensitivity and
$(b)$ voltage sensitivity of $M_{2}$ and $M_{1}$.

$A$ moving coil galvanometer of resistance $100 \ \Omega$ shows a full scale deflection for a current of $1 \ mA$. The value of shunt resistance required to convert this galvanometer into an ammeter, showing full scale deflection for a current of $5 \ mA$, is . . . . . . $\Omega$.

$A$ galvanometer having a resistance of $9 \, \Omega$ is shunted by a wire of resistance $2 \, \Omega$. If the total current is $1 \, A$, the part of it passing through the shunt will be ............ $A$.