The speed of a transverse wave travelling in a wire of length $50 \text{ cm}$,cross-sectional area $1 \text{ mm}^2$ and mass $5 \text{ g}$ is $80 \text{ ms}^{-1}$. The Young's modulus of the material of the wire is $4 \times 10^{11} \text{ Nm}^{-2}$. The extension in the length of the wire is

Two wires $A$ and $B$ of the same material have radii in the ratio $2:1$ and lengths in the ratio $4:1$. The ratio of the normal forces required to produce the same change in the lengths of these two wires is .......

Two wires $A$ and $B$ made of different materials of length $6.0 \ cm$ and $5.4 \ cm$, respectively, and area of cross-sections $3.0 \times 10^{-5} \ m^2$ and $4.5 \times 10^{-5} \ m^2$, respectively, are stretched by the same magnitude under a given load. The ratio of the Young's modulus of $A$ to that of $B$ is $x : 3$. The value of $x$ is . . . . . . . . . . .

$A$ force of $200\, N$ is applied at one end of a wire of length $2\, m$ and having area of cross-section $10^{-2}\, cm^2$. The other end of the wire is rigidly fixed. If the coefficient of linear expansion of the wire is $\alpha = 8 \times 10^{-6}\, ^\circ C^{-1}$,Young's modulus is $Y = 2.2 \times 10^{11}\, N/m^2$,and its temperature is increased by $5\, ^\circ C$,then the increase in the tension of the wire will be ........ $N$.

Which one of the following is not a unit of Young's modulus?

The Young's modulus for steel is much more than that for rubber. For the same longitudinal strain,which one will have greater tensile stress?