Two rods of different materials having coeffi | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(C) The thermal stress $\sigma$ developed in a rod fixed between two rigid walls when heated by a temperature change $\Delta 	heta$ is given by the f

Vedclass · Accepted Answer

$3:2$

Vedclass · Answer

(C) The thermal stress $\sigma$ developed in a rod fixed between two rigid walls when heated by a temperature change $\Delta 	heta$ is given by the formula:$\sigma = Y \alpha \Delta 	heta$where $Y$ is the Young's modulus and $\alpha$ is the coefficient of linear expansion.Given that the thermal stresses are equal $(\sigma_1 = \sigma_2)$ and the increase in temperature $\Delta 	heta$ is the same for both rods,we have:$Y_1 \alpha_1 \Delta 	heta = Y_2 \alpha_2 \Delta 	heta$$Y_1 \alpha_1 = Y_2 \alpha_2$Rearranging the terms to find the ratio $Y_1 : Y_2$:$\frac{Y_1}{Y_2} = \frac{\alpha_2}{\alpha_1}$Given $\alpha_1 : \alpha_2 = 2 : 3$,we have $\frac{\alpha_1}{\alpha_2} = \frac{2}{3}$,which implies $\frac{\alpha_2}{\alpha_1} = \frac{3}{2}$.Therefore,$\frac{Y_1}{Y_2} = \frac{3}{2}$ or $Y_1 : Y_2 = 3 : 2$.

Similar Questions

If the density of the material increases,the value of Young's modulus

The maximum elongation of a steel wire of $1 \,m$ length if the elastic limit of steel and its Young's modulus,respectively,are $8 \times 10^8 \,N \,m^{-2}$ and $2 \times 10^{11} \,N \,m^{-2}$,is: (in $\,mm$)

$A$ rod of length $l$ and area of cross-section $A$ is heated from $0^{\circ}C$ to $100^{\circ}C$. The rod is so placed that it is not allowed to increase in length,then the force developed is proportional to

What is the effect of change in temperature on the Young's modulus?

Vedclass Test Series

Exam Paper Generator

Online Exam Module