Two wires of different materials have same le | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(D) $1$. Stress is defined as force per unit area $(Stress = F/A)$. Since both wires have the same diameter $d$,they have the same cross-sectional are

Vedclass · Accepted Answer

same stress but different strain

Vedclass · Answer

(D) $1$. Stress is defined as force per unit area $(Stress = F/A)$. Since both wires have the same diameter $d$,they have the same cross-sectional area $A = \pi(d/2)^2$. When a force $F$ is applied to the combined wire,the same force $F$ acts on each wire. Therefore,both wires experience the same stress.$2$. Strain is defined as the ratio of change in length to the original length $(Strain = \Delta L / L)$. The relationship between stress and strain is given by Hooke's Law: $Stress = Y 	imes Strain$,where $Y$ is the Young's modulus of the material.$3$. Since the wires are made of different materials,they have different Young's moduli $(Y_1 
eq Y_2)$.$4$. Because $Strain = Stress / Y$,and the stress is the same for both but the Young's moduli are different,the strain in the two wires must be different.$5$. Thus,the wires have the same stress but different strain.

Two wires of different materials have same length $L$ and same diameter $d$. The second wire is connected at the end of the first wire and forms one single wire of double the length. This wire is subjected to a stretching force $F$ to produce an elongation $\ell$. The two wires have:

Similar Questions

The Young's modulus of a rubber string $8\, cm$ long and density $1.5\, kg/m^3$ is $5 \times 10^8\, N/m^2$. If it is suspended from the ceiling in a room,the increase in length due to its own weight will be:

The proportional limit of steel is $8 \times 10^8 \, N/m^2$ and its Young's modulus is $2 \times 10^{11} \, N/m^2$. The maximum elongation,a one metre long steel wire can be given without exceeding the elastic limit is ...... $mm$.

The unit of Young's modulus is

There are two wires of the same material and same length. The diameter of the second wire is two times the diameter of the first wire. What is the ratio of the extensions produced in the wires by applying the same load?

The adjacent graph shows the extension $(\Delta l)$ of a wire of length $1\, m$ suspended from the top of a roof at one end and with a load $W$ connected to the other end. If the cross-sectional area of the wire is $10^{-6}\, m^2$,calculate the Young's modulus of the material of the wire.

Vedclass Test Series

Exam Paper Generator

Online Exam Module