What is the temperature (in ^oC) of the steel | vedclass

Name: Exam Paper Generator | JEE NEET Paper Generator | Vedclass
Brand: Vedclass
Rating: 5 (35 reviews)

Question

(B) In the steady state,the rate of heat flow through the steel rod must equal the rate of heat flow through the copper rod.Let $T$ be the temperature

Vedclass · Accepted Answer

$44.4$

Vedclass · Answer

(B) In the steady state,the rate of heat flow through the steel rod must equal the rate of heat flow through the copper rod.Let $T$ be the temperature of the junction.The rate of heat flow is given by $H = \frac{KA(T_H - T_L)}{L}$.For the steel rod $(1)$: $K_1 = 50.2 \; J s^{-1} m^{-1} K^{-1}$,$A_1 = 2A_2$,$L_1 = 0.15 \; m$,$T_H = 300^{\circ} C$,$T_L = T$.For the copper rod $(2)$: $K_2 = 385 \; J s^{-1} m^{-1} K^{-1}$,$A_2$,$L_2 = 0.10 \; m$,$T_H = T$,$T_L = 0^{\circ} C$.Equating the heat flow rates:$\frac{K_1 A_1 (300 - T)}{L_1} = \frac{K_2 A_2 (T - 0)}{L_2}$$\frac{50.2 	imes (2 A_2) 	imes (300 - T)}{0.15} = \frac{385 	imes A_2 	imes T}{0.10}$$\frac{100.4 	imes (300 - T)}{0.15} = \frac{385 	imes T}{0.10}$$669.33 	imes (300 - T) = 3850 	imes T$$200799 - 669.33 T = 3850 T$$4519.33 T = 200799$$T \approx 44.4^{\circ} C$.

Similar Questions

Two plates of equal area are placed in series. The ratios of their thicknesses and thermal conductivities are both $2:3$. The temperature of the outer surface of one plate is $100 ^\circ C$ and that of the other is $0 ^\circ C$. The temperature of the common surface is ....... $^\circ C$.

Five rods of same dimensions are arranged as shown in the figure. They have thermal conductivities $K_1, K_2, K_3, K_4$ and $K_5$. When points $A$ and $B$ are maintained at different temperatures,no heat flows through the central rod if

In the Ingen-Hauz's experiment,the wax melts up to lengths $10 \ cm$ and $25 \ cm$ on two identical rods of different materials. The ratio of thermal conductivities of the two materials is:

$A$ cylindrical rod has temperatures $T_1$ and $T_2$ at its ends. The rate of flow of heat is $Q_1 \ cal/sec$. If all the linear dimensions are doubled while keeping the temperatures constant,then the new rate of flow of heat $Q_2$ will be:

Three conducting rods of the same material and cross-section are shown in the figure. The temperatures of $A$,$D$,and $C$ are maintained at $20^{\circ} C$,$90^{\circ} C$,and $0^{\circ} C$ respectively. If there is no heat flow in rod $AB$,the ratio of the lengths of $BD$ and $BC$ is:

Vedclass Test Series

Exam Paper Generator

Online Exam Module