When a potentiometer is connected between the points $A$ and $B$ as shown in the circuit,the balance point is obtained at $64 \ cm$. When it is connected between $A$ and $C$,the balance point is $8 \ cm$. If the potentiometer is connected between $B$ and $C$,the balance point will be: (in $cm$)

When a cell of $E.M.F.$ $E_1$ is connected to a potentiometer wire,the balancing length is $l_1$. Another cell of $E.M.F.$ $E_2$ $(E_1 > E_2)$ is connected such that the two cells oppose each other,then the balancing length is $l_2$. The ratio $E_1 : E_2$ is

$A$ potentiometer wire is $4 \text{ m}$ long and a potential difference of $2 \text{ V}$ is maintained between its ends. The e.m.f. of the cell which balances against a length of $80 \text{ cm}$ of the potentiometer wire is: (in $\text{ V}$)

$A$ cell can be balanced against $110 \ cm$ and $100 \ cm$ of potentiometer wire,respectively with and without being short-circuited through a resistance of $10 \ \Omega$. Its internal resistance is

The current in the primary circuit of a potentiometer is $0.2 \, A$. The specific resistance and cross-section of the potentiometer wire are $4 \times 10^{-7} \, \Omega \cdot m$ and $8 \times 10^{-7} \, m^2$ respectively. The potential gradient will be equal to .............. $V/m$.

$A$ potentiometer wire is $100 \, cm$ long and a constant potential difference is maintained across it. Two cells are connected in series first to support one another and then in opposite direction. The balance points are obtained at $50 \, cm$ and $10 \, cm$ from the positive end of the wire in the two cases. The ratio of emfs is: