Wires $A$ and $B$ are connected with blocks $P$ and $Q$ as shown. The ratio of lengths,radii,and Young's modulus of wires $A$ and $B$ are $r, 2r$,and $3r$ respectively ($r$ is a constant). Find the mass of block $P$ if the ratio of the increase in their corresponding lengths is $1/(6r^2)$. The mass of block $Q$ is $3M$.

$A$ steel rod of length $1\,m$ and area of cross-section $1\,cm^2$ is heated from $0\,^{\circ}C$ to $200\,^{\circ}C$ without being allowed to extend or bend. Find the tension produced in the rod $(Y = 2.0 \times 10^{11}\,N/m^2, \alpha = 10^{-5} \,^{\circ}C^{-1})$.

$A$ metal rod of cross-sectional area $3 \times 10^{-6} \,m^{2}$ is suspended vertically from one end and has a length of $0.4 \,m$ at $100^{\circ} C$. The rod is cooled to $0^{\circ} C$, but prevented from contracting by attaching a mass '$m$' at the lower end. Find the value of '$m$'. (Given: $Y = 10^{11} \,N/m^{2}$, coefficient of linear expansion $\alpha = 10^{-5} /K$, $g = 10 \,m/s^{2}$) (in $\,kg$)

$A$ student performs an experiment to determine the Young's modulus of a wire, exactly $2 \,m$ long, by Searle's method. In a particular reading, the student measures the extension in the length of the wire to be $0.8 \,mm$ with an uncertainty of $\pm 0.05 \,mm$ at a load of exactly $1.0 \,kg$. The student also measures the diameter of the wire to be $0.4 \,mm$ with an uncertainty of $\pm 0.01 \,mm$. Take $g=9.8 \,m/s^2$ (exact). The Young's modulus obtained from the reading is

The cross-sectional area of each wire is $10^{-4} \, m^2$. What is the displacement of point $B$?

What is the Young's modulus and bulk modulus for a perfect rigid body?