$A$ cylindrical tank is filled with water to a level of $3 \,m$. $A$ hole is opened at a height of $52.5 \,cm$ from the bottom. The ratio of the area of the hole to that of the cross-sectional area of the tank is $0.1$. The square of the speed with which water will be coming out from the orifice is $(g=10 \,ms^{-2})$.

$A$ person in a lift is holding a water jar,which has a small hole at the lower end of its side. When the lift is at rest,the water jet coming out of the hole hits the floor of the lift at a distance $d$ of $1.2 \ m$ from the person. In the following,the state of the lift's motion is given in List-$I$ and the distance where the water jet hits the floor of the lift is given in List-$II$. Match the statements from List-$I$ with those in List-$II$ and select the correct answer using the code given below the lists.

List-$I$	List-$II$
$P$. Lift is accelerating vertically up.	$1$. $d = 1.2 \ m$
$Q$. Lift is accelerating vertically down with an acceleration less than the gravitational acceleration.	$2$. $d < 1.2 \ m$
$R$. Lift is moving vertically up with constant speed.	$3$. $d > 1.2 \ m$
$S$. Lift is falling freely.	$4$. No water leaks out of the jar.

Water $(\rho_1=1000 \, kg/m^3)$ and kerosene $(\rho_2=800 \, kg/m^3)$ are filled to the same height in two identical cylindrical vessels. Both vessels have small holes at their bottom. The speeds of the water and kerosene coming out of their holes are $v_1$ and $v_2$ respectively. Select the correct alternative.

$A$ vessel completely filled with water has holes $A$ and $B$ at depths $h$ and $3h$ from the top respectively. The hole $A$ is a square of side $L$ and $B$ is a circle of radius $r$. The water flowing out per second from both the holes is same. Then $L$ is equal to

$A$ container has a hole of cross-sectional area $1 \, cm^2$ at its bottom. If water is poured into the container at a rate of $70 \, cm^3/s$, what is the maximum height (in $cm$) to which the water can be filled?

$A$ wide cylindrical vessel $50 \ cm$ in height is filled with water and rests on a table. Assuming the viscosity to be negligible, find at what height from the bottom of the vessel a small hole should be made for the water jet coming out of it to hit the surface of the table at the maximum horizontal distance from the vessel. (in $cm$)