The rate of flow of heat through a copper rod with a temperature difference of $28^{\circ} C$ is $1400 \ cal s^{-1}$. The thermal resistance of the copper rod will be:

Two slabs $A$ and $B$ of equal surface area are placed one over the other such that their surfaces are completely in contact. The thickness of slab $A$ is twice that of $B$. The coefficient of thermal conductivity of slab $A$ is twice that of $B$. The first surface of slab $A$ is maintained at $100^{\circ} C$, while the second surface of slab $B$ is maintained at $25^{\circ} C$. The temperature at the contact of their surfaces is (in $^{\circ} C$)

Four rods of identical cross-sectional area and made from the same metal form the sides of a square. The temperatures of two diagonally opposite points are $\theta$ and $\sqrt{2}\theta$ respectively in the steady state. Assuming that only heat conduction takes place,what will be the temperature difference between the other two points?

Three rods $A, B$ and $C$ of thermal conductivities $K, 2K$ and $4K$,cross-sectional areas $A, 2A$ and $2A$ and lengths $2l, l$ and $l$ respectively are connected as shown in the figure. If the ends of the rods are maintained at temperatures $100^{\circ}C, 50^{\circ}C$,and $0^{\circ}C$ respectively,then the temperature $\theta$ of the junction is ......... $^{\circ}C$

Three rods of same dimensions are arranged as shown in the figure. They have thermal conductivities ${K_1}, {K_2}$ and ${K_3}$. The points $P$ and $Q$ are maintained at different temperatures. For the heat to flow at the same rate along the path $PRQ$ and the path $PQ$,which of the following options is correct?

Two identical square rods of metal are welded end to end as shown in figure $(a)$. Assume that $10 \, cal$ of heat flows through the rods in $2 \, min$. Now the rods are welded as shown in figure $(b)$. The time it would take for $10 \, cal$ to flow through the rods now,is ........ $\min$.