What force is required to stretch a wire of cross-sectional area $1 \, cm^2$ to $1.1$ times its original length? (Given: Young's modulus $Y = 2 \times 10^{11} \, N/m^2$)

Four identical hollow cylindrical columns of mild steel support a big structure of mass $50,000 \; kg$. The inner and outer radii of each column are $30 \; cm$ and $60 \; cm$ respectively. Assuming the load distribution to be uniform,calculate the compressional strain of each column. (Take Young's modulus of mild steel $Y = 2.0 \times 10^{11} \; Pa$ and $g = 9.8 \; m/s^2$)

What is the Young's modulus and bulk modulus for a perfect rigid body?

$A$ wire of area of cross-section $10^{-6} \ m^2$ is increased in length by $0.1 \%$. The tension produced is $1000 \ N$. The Young's modulus of the wire is:

Two blocks of mass $2 \ kg$ and $4 \ kg$ are connected by a metal wire going over a smooth pulley as shown in the figure. The radius of the wire is $4.0 \times 10^{-5} \ m$ and Young's modulus of the metal is $2.0 \times 10^{11} \ N/m^2$. The longitudinal strain developed in the wire is $\frac{1}{\alpha \pi}$. The value of $\alpha$ is [Use $g = 10 \ m/s^2$].

There is some change in length when a $33000 \,N$ tensile force is applied on a steel rod of area of cross-section $10^{-3} \,m^2$. The change of temperature required to produce the same elongation, if the steel rod is heated, is (The modulus of elasticity is $3 \times 10^{11} \,N/m^2$ and the coefficient of linear expansion of steel is $1.1 \times 10^{-5} /{ }^{\circ}C$). (in $^{\circ}C$)